SWEP DPD-TYPE



The DP200 is a highly effective, versatile True Dual that is a natural choice for flexible chillers and climate control applications. Its advantage is its ability to offer full performance at both full and half load. It is also optimized for high performance with the refrigerant R410A.


The DP200 is a highly effective, versatile True Dual that is a natural choice for flexible chillers and climate control applications. Its advantage is its ability to offer full performance at both full and half load. It is also optimized for high performance with the refrigerant R410A.

SWEP's versatile Highpressure products enable efficient heat exchange in applications combining small flows and particularly high pressures. The product is approved for pressures up to 45 bar (650 psi), so it can be used with the majority of current highpressure refrigerants.

SSP calculator software

With SWEP's unique SSP G7, the SWEP Software Package, you can do advanced heat transfer calculations yourself, and choose the product solution that suits your application best. It's also easy to choose connections and generate drawings of the complete product. If you would like advice, or you would like to discuss different product solutions, SWEP offers all the service and support your need.

Third party approvals

SWEP BPHEs are generally approved by below certification organizations. Europe, Pressure Equipment Directive (PED) America, Underwriters Laboratories Inc (UL) Japan, KouatsuGas Hoan Kyoukai (KHK) Additionally SWEP holds approvals from a vast variety of other certification organizations. For approval information regarding a specific product please contact your local SWEP representative. SWEP reserves the right to make changes without prior notice.

Material disclaimer

The information and recommendations in regards to the products are presented in good faith, however, SWEP makes no representations or warranties as to the completeness or accuracy of the information. Information is supplied upon the condition that the purchasers will make their own determination as to the products' suitability for their purposes prior to use. Purchasers should note that the properties of the products are both application and material selection dependent and that products containing stainless steel, both 316 and 304 families, are still subject to corrosion if used in unsuitable environments. Purchasers should also be advised that stainless steel from the 304 family can be more sensitive in regards to corrosion than stainless steel from the 316 family. By purchasing products displayed here upon SWEP disclaims all responsibility due to corrosion of the products and/or other materials attached to the products and also for any damages resulting from the use of the products.

Form Order Product

Please complete the below order form correctly, our team will contact you shortly

Design Data Sheet
General one phase application - Heat load kW
S
L
I
D
E

1
Media S
L
I
D
E

2
Media
Temperature in
°C
Temperature in
°C
Temperature out
°C
Temperature out
°C
Flow rate
l/min
Flow rate
l/min
Max Pressure drop
kPa
Max Pressure drop
kPa
Evaporator and economizer application - Heat load kW
Slide 1
Evaporated Media
Media Slide 2
Media to be cooled
Media
Evap temp. (dew point)
°C
Temperature in
°C
Superheating
K
Temperature out
°C
Flow rate
kg/h
Flow rate
l/min
Max Pressure drop
kPa
Condenser and desuperheater applications - Heat load kW
Slide 1
Condensing Media
Media Slide 2
Media to be heated
Media
Hot Gas Temperature in
°C
Temperature in
°C
Cond. Temperature
°C
Temperature out
°C
Sub Cooling
K
Flow rate
l/min
Flow Rate
kg/h
Max Pressure drop
kPa
Addtional Information