FLOS000000 - FLOE000010 Flooding Detector Pinhole sensor

FLOS000000 - Flooding Detector Pinhole sensor

The new flood detecting device is able to sense the presence of water in an environment. 
It is generally used to protect against flooding in computer rooms, offices, laboratories, special environments. It is made up of a detector (normally fitted on the electrical panel) and a sensor (installed in the position being checked).
When the sensor is wet by the water, the alarm is automatically activated on the detector, switching the status of the relay.




Power supply

24 Vac (-15%...+10%), 50/60 Hz

Power input

1.5 VA

Operating conditions

-10T60 °C, <90% H.R. non-condensing

Alarm relay output circuit

250 Vac 2 A resisitive, 2 A inductive, cosfi=0.4, 2 (2) A, according to EN60730-1 (100.000 cycles)

MAximum length of the probe connection cable

500 m with single wire cable and double insulation

Cross-section of the connection cable

1.5 mm²

Standard compliance

CE EN 6000-6-2, EN 6000-6-4 (EMC), EN 61010-1 (safety)

Index of protection